These days, life without hot water can be uncomfortable. The water heater is a must for every home.
Your water heater can provide the hot water you need for many years. If your water heater has been in service for a very long time, you will want to know when to replace it avoid the hassles water heater issues. With proper caution and maintenance, your unit can stand the test of time.
Inspect once in a while your water heater to see if there’s something wrong with it. Use a bright flashlight to inspect all the pipes and valves that are connected with it. If some of them appear to be rusty or damaged, try to change them as soon as possible to prevent an accident. According to some articles, because people tend to forget to inspect their water heater once in a while so the result- a sudden explosion of their water heater. Much better to check your water heater about every six months or when you see leaks or it doesn’t work in a usual way, call maintenance to check it or replace it with a new one.
The anode rods protect the tank. The anode rods in the water heater can worsen with time. Some have two or some have one anode rods that must be checked within the 3-4 year span. These may be difficult to remove so you might need an expert in hot water system Ipswich Qld to do it. If you could do it on your own, it might save your undamaged water heater and you might not replace it in some more years to come. Sometimes a sudden inspection on these rods will give an idea if they need replacement.
Perhaps you ask if your water heater should be replaced because it’s old. It depends on how you manage the unit. If you don’t do some maintenance on your water heater once in a while, replacement is ideal. If you do not know the age of your water heater, you might want to check the serial number or the warranty data on the heater’s tag. On the other hand, if the water heater doesn’t show any problems when in use or it’s still giving you the heat that you need, replacement may not be needed right away.
A quick trip to the bathroom then you notice you’re dealing with a clogged drain. It is never an ideal circumstance. What to do with a clogged drain? Before you call a plumber to check on your clogged drains, check if you can fix it with these simple tips:
Hot water. Heat water up but do not let the water get to boiling point. Pour the hot water directly into the drain and let it sit for a few minutes to see if it loosens the clog. Hot water can effectively remove the clog if done right.
Vinegar and baking soda. The mixture of vinegar and baking soda can de-clog drains. You pour a cup of baking soda on the drain. Then, followed by a half-cup vinegar down the drain. Allow it for half an hour, pour hot water down the drain and wait for results.
Plunger. You can find the right plunger for your drain. Purchase a bowl-shaped plunger without a collar used for sinks. To start de-clogging, fill the sink about halfway with water and start plunging. You will see that the plunger is effective and the clog is being removed once the drain is draining.
Call a plumber. If none of the above work and you still find that the clog there, call for Ipswich plumbing. Your local plumber knows the right solution for tough clogs. They use the latest technology to fix any plumbing issues. Thus, by the end of their visit, your drains will be clog-free.
While minor plumbing fix is something you can do on your own, but most plumbing maintenance should only be handled by expert plumbers Forest Lake. One of the plumbing maintenance that requires an expert is the sump pump. Instead of attempting to fix the sump pump or prepare it to handle heavy rains, you can just simply call for professional residential plumbing service to do the job for you.
Sump pumps work to gather and pump the excess water away from your home. The pump mostly directs water to storm drains. Problems may occur with sump pumps when the local water table is higher than the home’s foundation which could cause flooding.
Here is a few sump pump maintenance to consider:
Backup sump pump. You will want to have a backup pump and make sure it works when needed. If your backup battery is not working, you may just be waiting for a plumbing emergency to happen.
Check any debris and algae. Debris and algae accumulation in the sump pump may hamper its performance and eventually cause overheat and mechanical failure. Clear away the water trash to avoid sump pump failures.
Float switches. The floatation device works as a level sensor to signal your pump of the rising water levels in a sump pit. This is located inside the pump which can also fail.
Older sump pumps. If the pump is more than ten years old, mechanical problems arise. It includes freezing of the impeller or a deteriorated motor.
Fixing these sump pump issues requires a professional plumber to get the job done right and to avoid having standing water. It is best to let the experts take care of your plumbing needs.
Homes have different plumbing systems as all residential homes are not built the same. When describing your plumbing needs, your contractor will introduce branched and series plumbing system, which connects water to the tubs, sinks, toilets, showers and so on. To know the right system for your home, the plumber will see this to determine what you have.
The branched plumbing system has a variety of designs. However, they all share similarities with the pipes dividing and going into different directions for hot and cold water. This plumbing system can provide one floor with cold water and the other hot water at the same time. The water will split off in different directions to accommodate the needs of the users. This kind of plumbing is efficient in giving hot and cold fixtures but complicated for plumbers to fix.
Series plumbing is mostly simple as the hot water will just come from a hot water heater and the cold water will be supplied from a ground supply. They can run adjacent but are mostly separate. The system is not complicated for plumbers to find and fix the connection.
If you want to know more about the type of plumbing system you have, contact your plumber Ipswich. They are well equipped to help you with any of your plumbing needs.
Winter can be really cold and hot water comes very needed. However, you may want to consider ways to save more on hot water even if it is winter. Here are some practical steps you can take to reduce energy use of your hot water system during the cold months.
Reduce shower time
It may sound silly, but it works. It is a natural way to avoid spending more hot water. It is normal for us to want a long hot shower in the bathroom as it can calm our body even more during the cold days. But reducing your shower time will allow you to just save more.
If you are using a solar hot water system, it is likely to use half the heat from the pipes. Insulating the pipes especially the exposed ones can save you money on energy costs. Insulated pipes prevent hot water pipes from losing their heat around cold air. It can reduce heat loss and lower the costs of heating the water.
Reduce the hot water level
In Australia, winter is not that so chilly compared to other countries. Some even say that this winter has even felt like warm autumn than a cold winter. In this situation, you may just turn the hot water down a bit. It may be a minor adjustment, but it can save more on energy cost.
Is it time to replace your hot water system?
If your 7 to 10-year-old hot water system is costing you more than saving, perhaps you will want to consider getting a new unit. If a replacement is imminent in the next few years, it would be practical to have it replaced presently to maximize the cost-saving benefits. Ask a professional hot water system Ipswich to help you find the right unit for you.
Is your tap water look brown? Seeing brown water coming out of your tap is a reason to be worried. There are several reasons why the tap water in your house is making such discolourations.
Brown or Orange Particles in Water
If brown flakes appear from the tap while the water quality is still clear, the pipe in your house may be already corroded. The rust-like chips that are joining the water are coming from them.
Rusty coloured water
Rusty tap water can be a yellowish or dark brown to black, which happens during pipe maintenance, burst main pipes, fire hydrant testing, or natural causes. It mostly goes out on its own and your water quality restores to its natural quality. You do not have to worry when this happens.
If you see brown water coming out from your tap, check possible causes. Inspect your home if the discoloured water is coming only from one tap or if it is happening to all your faucets. See if your neighbours are having the same water issue or if the problem is only your water lines.
If you are not the only one experiencing water issues in your neighbourhood, then it could be water maintenance happening in your area. If your house is the only one having water problems, perhaps something is wrong with your water channels. Call an expert in plumbing Ipswich, to find the problem pipe that causes water discolouration.
The hot water system is essential for every home. Hot water is needed in many of the daily chores so you don't want something wrong to happen to your water heater. That said, the water heater must be maintained to work efficiently. However, warning signs appear before a serious problem hit the water heater. It is important to identify the problem immediately before it becomes a big problem.
Warning signs gas water heater will break
There are clear warning signs that gas water heating system is about to fail. A bad leak at the bottom of the tank is a clear indication that your water heater needs replacement. Bad leak under the tank is often irreparable. Call for professional hot water system installation Ipswich for the proper installation job.
Your water heater needs checkup includes a gas leak, not enough or no hot and warm water, brown water and strange noises. Some of these warning signs call for repair or immediate attention because it is very dangerous for all occupants of the house. For example, when there is a gas leak, call the plumber immediately.
Water leak near the heating unit indicates damaged lines. Check for dripping sound to find the leak. If the exterior tank of the heater appears to have signs of condensation then it signals the self-containment of the unit has a problem. You will want to call the plumber at once to fix the problem to prevent more damage.
Basic maintenance will keep your water heater in good operating condition. Flushing the water heater reduces sediment and helps prolong the life of the heater unit.