The toilet is one of the often-used areas in a house. It can make you feel uncomfortable when problems occur on bathroom plumbing and may even call a plumber to help you with it. Here are some of the most common problems we may encounter with our toilets.
Leaking toilet tank. Also known as a phantom flush, it happens when there is a slow leak from the tank going to the bowl which will make the broken flushing. It can be fixed by draining the tank and cleaning the flapper seat. Replace it if damaged or worn.
Weak flush. When bowl empties slowly, there could be clogged homes underneath the bowl’s rim. It can be fixed by clearing the debris out by poking gently into each flush hole but do gently avoid scraping the bowl.
Clogged toilet. Clogs are the most common problems found in toilets. Minor clogs can be solved by a good plunger while a closet auger can get rid of serious ones.
Leaky toilet seals. This sure needs repair and replace it right away. Since there are at least five seals, a leak or break can cause great problems. It should be fixed right away.
In the toilet problem continue, call for professional plumbing services. They can identify the cause of the problem and know what to do to fix it.
Houses have several types of exhausts. There is the chimney furnace, a kitchen fan or a dryer vent. The plumbing vent stack also works as an exhaust but does not get too much attention unless the winter comes and it freezes shut. Trouble in this part can make the toilet flushing harder.
To avoid plumbing vent trouble in winter, here are some of the things you need to know:
The purpose of the vent stack is to allow unpleasant sewer gases to release through your roof. It is common to see the cast-iron pipe, but in newer homes, this can be made of PVC. Most homes have one stack, connecting drain lines to it. The drains in the tub, sinks, toilets and the likes have a trap blocks sewer gases from escaping from the drain. The use of a plumbing vent is to maintain the air pressure in the drain system as normal as possible so that the water will not draw off out of these traps.
Plumbing vent problems
One common problem is when plumbing smells like sewer. Snow can clog pipes which may lead to sewer gases inside your house. Extreme cold temperature can make the plumbing vent freeze. The water vapour in the vent can accumulate and thus freeze on the top of the stack which may close it off entirely if ignored. Snow buildup of freezing of the vent pipes will result in having an awful smell. Even if the vent does not freeze completely, this may cause toilets to have trouble flushing or it could also affect the other drains in the home.
A blocked or clogged plumbing vent is a challenge to repair. Trouble in the plumbing vent can be fixed by your local plumber.
When plumbing smells like rotten eggs, there could be a serious sewer gas leak in your home. If this is the case, then do not ignore it. What causes this problem?
Drain not used in a while. Drain lines have a trap, which is a U-shaped pipe that contains water, and it stops sewer gas from coming up into your home through the drain. If the sink is not used for a while, the water in the trap can evaporate, leaving the unpleasant gas into your home. This can be fixed by running the water to refill the trap and get rid of the smell.
No drain trap. If a proper trap was not installed, this is likely to make that nasty smell. Nothing is blocking the smell from the sewer from entering into your home. If there's no drain trap, call a qualified plumber to install the proper trap.
Greasy drain. In many cases, grease or fat getting stuck in your drains causes the rotten egg or mouldy smell in the kitchen sink. When you pour grease down your drain, it can harden to the sides. As it starts to decompose the smell can make its way back into your home. To get rid of the smell, you can try putting a couple of teaspoons of baking soda in the drain and then pour in some vinegar. Then follow it with a pot of boiling water. The combination of baking soda/vinegar will eat away at the grease in the drain and the boiling water helps rinse it all away and clears the drain.
Clogged plumbing vent. Clog in the plumbing vent can cause the sewer smell back up into your home. Also, inspect the vent for blocking elements like a bird’s nest. Removing any obstructions and adding screens in the plumbing vents prevents future problems.
Should you call a plumber to install your new dishwasher? If it was a simple installation, then no one would need a plumber to install a dishwasher. Installing a dishwasher is not as easy as many think and it is best left to the plumbing experts. Your home insurance provider will surely agree on this.
There are many reasons to use the services of a licensed, professional plumber to install a dishwasher. Here are important reasons why you should hire a professional plumber for dishwasher installation.
Not an easy task, very technical work. Installing your new dishwashing machine may need new connections, or existing connections must be modified in some way to avoid any electrical problem. Such plumbing installation requires the proper application of specific codes and regulations. It is important to have someone with proper training and experience to get this work done properly. You cannot rely on someone with little or no experience with the correct installation of a dishwasher.
Professional installation makes the dishwashing machine work at maximum capacity and longer life span. Poorly installed dishwashers may result in leaking, wasted water, and in the worst cases water damage to the surrounding areas.
Make your kitchen looking its best. Dishwasher installation requires a lot of maneuvering and rearranging to fit into your kitchen. You want it properly installed to make your kitchen look its best. This is something that your local plumber can do for you. They will do the work with little impact as possible and leave the area clean and looking good.
Avoid costly dishwasher repairs. Trying to do it on your own or hiring a low-cost handyman may end up costly with the aftermath. Improper installation may leave you paying out more to repair bad installation.
It is important for your bathroom plumbing to be problem-free as this is part of your home that is mostly used. The showers, toilets, sinks, tubs are often used. Maintaining a problem-free bathroom is essential as we rely too much on this room. Since this part of your home is mostly used, things can happen that may require a plumbing service. Here are some signs that your bathroom may need some attention:
Leaking Faucet. Dripping faucets may be a minor plumbing issue, but it indicates something's wrong with your plumbing and it needs attention. Do not think that this is just a simple plumbing issue, fix it right away because the problem can get worse if you ignore it. Your bathroom is an often used part of your home and if things are wrong with it, your whole household will be affected. Call your local plumber to see the plumbing problem and so that your bathroom can be fully used again without the issues.
Slow Draining Sink. When draining comes slow, it may be clogged. You need to fix this right away by simply purchasing drain-opening products in home improvement stores. You can also use a plumbing snake and pour boiling water to the affected drain. If it still does not work, better call a professional since a clog can also cause a burst pipe.
Poor Water Pressure. Low level of water pressure could indicate issues in the plumbing. Poor water pressure can also indicate that the water heater is not operating right, there could be a broken pipe or malfunctioning part. Call an expert in hot water system repair North Booval to get it back to normal.
Most people rely on the water heater for their daily hot water necessities. If your hot water system has been around for a long time, you may want to know when is the right time to replace the unit to prevent water heater trouble. With proper care and maintenance, it can serviceable for a long time.
A periodic inspection helps monitor the condition of your water heater and in early detection of hot water problems. Use a flashlight to check all the pipes and valves connected with the apparatus. If some of them look rusty or damaged, better change them immediately to prevent hassles. It is recommended to check your water heater about every six months or when you notice leaks or when it doesn’t work in the usual way. The best way to deal with water heater problems is to call an expert in hot water system repair Blackstone to fix them for you.
Check the anode rods of the water heater as some problems are attributed to the depleted anode rod. Some water heaters have two or others have one anode rods that must be checked in three to four-year span. These rods may be difficult to remove so you may need the help of an expert. Sometimes an unexpected inspection on these rods will give you the idea if you have to replace them.
Should you replace your water heater because it’s old. It depends on how you maintain your unit. If you don’t do some maintenance on your water heater once in a while, especially when it's no longer working efficiently, replacement may be necessary. In case you do not know the age of your water heater, check the serial number or the warranty data on the heater’s tag. But if the water heater doesn’t show any problems when in use or it’s still providing hot water in your home efficiently, then it may not be time for a replacement.
The shower is a typical part of the bathroom, but most of us are not very familiar with the parts behind it and how all plumbing parts of the shower go together. We take a look at the most common shower plumbing parts.
SHOWER HEAD. It is one of the most obvious parts of a shower that is connected to the water pipes. In case it breaks, this shower plumbing part is easy to replace. Showerheads are available in different shapes so find the best shower head for you.
HOT & COLD WATER PIPES. These are part of the shower water supply. It delivers the water to the showerhead. Most older homes have galvanized steel pipes. Weak water pressure may be the result of sediment buildup due and it may be time to get those pipes replaced. Copper is still a common choice but others choose PEX pipe and fittings because of its low cost and simple installation.
SHOWER VALVE. This part of the shower plumbing works to control the flow of the water coming from the showerhead. Furthermore, you can adjust the temperature of the water from the shower valve. Make sure the valve is a thermostatic valve or pressure balanced valve to prevent uncomfortably hot water temperature.
SHOWER CARTRIDGE. This part of the shower plumbing system controls works to open the cold and hot water inlets. This allows you to adjust the temperature of your shower when you slide the handle to cold or hot water setting. When something's wrong with the temperature control, call an expert in hot water system repair Collingwood Park to help you fix it.
SHOWER STRAINER. Located in your shower floor, it works to stop waste from going down the drain and blocking it. It is commonly made of steel or aluminium, and they are available in different designs and finishes.
SHOWER PAN. This is one of the most basic shower plumbing parts placed under the tile floor of a shower. The shower pan, made of either lead or vinyl, is a waterproof barrier in the shape of a pan and its purpose is to catch any water that may flow through the tile and grout and direct it to the drain.
If you are looking to purchase a new hot tub, what plumbing is required for a hot tub? There is no need to install plumbing as hydro pool designs are self-contained and pre-plumbed units. It will not need on-site connections or need to install residential water supplies or drains. But before the hot tub delivery and installation, you will need to prepare the following:
BASE PREPARATION. Make sure there is a suitable hot tube base. It should be a solid, level and flat base to make even distribution of the weight. Possible bases include:
It is not advised to have the hot tub or swim spa sitting on the grass. This is because the weight of the tub may cause evenly distributed or off level position.
POWER SUPPLY. Hot tubs and swim spas operate on electricity, so it will need an electrical supply. You will need the services of a certified and qualified electrician to install electrical supply for your hot tub and swim spa.
WATER SUPPLY. Since hot tubs are not plumbed in and do not need water supply to be directly adjoining to the hot tub, it simply needs a hose to fill it up with water.
DRAINAGE. Water from the hot tub can be drained to a built-in drainage hose. Some people set their hot tub or swim spa near the main drain so they can open the drainage hose and let the water drain.
Others use a submersible pump, attached to a hose, into the hot tub to drain the water directly to the main drain. This option will allow you to be more flexible with positioning and it empties hot tub faster.
Your home has different types of exhausts. There is for the furnace if you have a chimney, a kitchen fan or a dryer vent. There is also the plumbing vent stack that does not get too much attention unless the winter comes and it freezes shut. This may make flushing the toilet harder!
To protect you in winter, here are some of the things you need to know about this vent:
What does it do?
The main task of the vent stack is to let sewer gases to harmlessly vent through your roof. This is mostly made of a cast iron pipe but in newer homes, this can be made of PVC. Most homes have one stack, and the drain lines are mostly connected to it. The drains in your home that includes the tub, sinks, toilets and the likes have a trap that works like a plug to maintain the sewer gases from escaping from the drain. The use of a plumbing vent is to maintain the air pressure in the drain system as normal as possible so that the water will not draw off out of these traps.
What can go wrong?
Plumbing vents are mostly ignored during the rest of the year, but during cold weather, homes may need to look into. But can plumbing vents freeze? In extremely cold, water vapour in the vent can accumulate and thus freeze on the top of the stack which may close it off completely if ignored. When this occurs, the drain system will be disrupted that will result in having an awful smell. Even if the vent does not freeze completely, this may cause toilets to have trouble flushing or it could also affect the other drains in the home.
When this happens, make sure to contact your plumber so that they can fix your vent right away. Do not ignore this because the gases that can build up in your home is not safe aside from having that bad smell.
Plumbing vents are important to any plumbing system. The main task of these pipes is to create equal pressure in the pipes by allowing air to flow into the drainage system, which will let the waste to flow passively out to the septic system or sewage. When this is blocked or wrongly installed, the vents can cause gurgling noises, sewer odours and poor drainage.
If you are uncertain about the quality of the vents in your home especially if you see some signs of problems, make sure that you get it to check. But where are plumbing vents located, you may ask. Most plumbing vents stacks are placed on the roof but there are other places where it can be at the ground level or on the side of a building.
The main drain line
The vent pipes mostly run straight up and down from the main line of your house. This is commonly located in the basement or crawl space underneath the house. You can easily know that it is the main drain line because you can easily hear the pipes and the flow of the water especially when someone flush the toilet and you are in the basement near the drain line.
Your attic and roof
Once you know where the general location of your vent pipe, you can now check them in your attic or roof. The vent pipe in the attic is similar to a toilet drain pipe which is a diameter pipe. Some plumbing vent pipes are capped in the attic, or they could continue travelling upwards and will finish above the roof.